PHYSICAL D-LIGHT DEFENSE CREAM
Ashland
Preparation:
In the main vessel mix phase A with propeller while heating to 60°C until homogeneous and clear. At 60°C , add phase B into A and mix until homogeneous. At 60°C, add phase C step by step in the main beaker while mixing until evenly dispersed. In a side beaker, homomix phase D until the gel is smooth while heating up to 60°C. At 60°C, add phase E ingredients into phase D one by one and mix well between each addition : phase D+E should be clear. At 60°C, introduce very slowly while homomixing phase D+E into phase A+B+C to create W/O emulsion. Start to cool down the batch. Stop at 25°C.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
LipoTrue opens the door to further and more innovative science and technologies, overflowing with new concepts and novel active ingredients the dynamic and fast-changing cosmetic market. LipoTrue acts as a central R&D engine integrating cutting edge technology platforms in order to provide advanced active ingredients with proven and solid...
California Chapter Suppliers’ Day 2025
Long Beach Convention Center
29th - 30th October 2025
in-cosmetics Asia 2025
BITEC, Bangkok, Thailand
4th - 6th November 2025