Smooth Repairtopic Care
Preparation:Heat the water up to 40-50 °C. Pre-disperse xanthan gum in glycerin and add to the water. Heat phase A and B at 85°C. At temperature add phase B into A whilst stirring. Homogenize using Ultra Turax (2min at 10000 rpm). Allow to cool down whilst stirring moderately. Add sensitive phase C below 45 ° C. Adjust pH.
Notes:Bright, smooth & thick emulsion — Viscosity (21°C): 195184 mPa.s (LV4;1 rpm) - pH= 5,7
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.