Pearlescent Hair Mask
Hallstar
Preparation:
Procedure Prepare phase A and heat it to 80-85°C; Prepare phase B and heat it to 75-80°C; Add phase B to phase A and homogenize, using a suitable dispersion unit (e.g., Silverson, Ultra-Turrax®) for 3 minutes at 2500 rpm; Cool under gentle stirring to room temperature; Add phase C to phase AB and homogenize, using the suitable dispersion unit for 3 minutes at 2500 rpm; Adjust pH to between 5.0 and 5.5. Properties (25°C) Appearance: Shiny white cream Viscosity (20 rpm, Brk, RV DV-II, T-D, after 24 hours at room temperature; mPa∙s): 40000-50000 pH (as is): 5.0-5.5Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Nagase Viita -Where beauty and biotechnology thrive
With a deep insight into biotechnology and science, Nagase Viita develops unique functional saccharides and saccharide-based active ingredients utilizing enzymes and fermentation through sustainable manufacturing.
Followed by 140 years of history for exploring glycoscience...
CITE JAPAN 2025
Pacifico Yokohama
14th - 16th May 2025
NYSCC Suppliers' Day 2025
Javits Center, New York
3rd - 4th June 2025