Replenishing Aftershave Cream
Hallstar
Preparation:
Heat phase A to 75-80°C, using a suitable unit to disperse the thickener. Heat phase B to 70-75°C. Add phase B to phase A at 70-75°C and homogenize using a suitable dispersion unit. Add phase C. Cool to 40°C under gentle agitation. Add phases D and E and homogenize using a suitable dispersion unit.Notes:
Appearance: Shiny white cream Viscosity (Brk, RVDV-E, T-C, 10 rpm, after 24 hours at room temperature; mPa∙s): 40,000–55,000 pH: 6.0–7.0Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Good Face Project is beauty’s only cloud-based, AI-powered Formulation, Regulatory Compliance, and PLM Software. Since 2018, Good Face has been building the world's largest centralized International Nomenclature Cosmetic Ingredient (INCI) database which encompasses up-to-date scientific research, worldwide regulations, retail policies and...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025