Creamy Shaving Foam
Preparation:Prepare phase A and adjust pH to approximately 6.5 using the Triethanolamine. Homogenize using a suitable dispersion unit (e.g., Silverson, Ultra Turrax). Prepare phase B and heat to 75-80°C. Add phase C to phase B under magnetic stirring. Heat phase A to 50°C, then add phase BC and homogenize. At 40°C, add phase D and mix until homogenous.
Notes:Properties (25°C) Appearance: White cream Viscosity (Brk, RVDV-E, Sp 6, 20 rpm, after 24 hours at room temperature; mPa·s): 270.000–400.000 pH: 6,5–7,0
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.