Moisturizing Cream CRP-3
Prodew 600 imparts a long lasting moisturizing effect.
Phase
Product
INCI Name
Supplier
Volume
A
Squalane
3.00
Refined Microcrystalline Wax
Microcrystalline Wax*1
NIKKO RIKA
2.00
IPM
Isopropyl Myristate*2
KOKYU ALCOHOL KOGYO
5.00
KF-96A-10CS
Dimethicone*3
SHIN-ETSU
0.50
KALCOL 6098
Cetyl Alcohol*4
KAO
3.00
KALCOL 220-80
Behenyl Alcohol*5
KAO
1.00
NIKKOL MGS-BV
Glyceryl Stearate*6
NIKKO CHEMICALS
3.5
NIKKOL TS-10V
Polysorbate 60*7
NIKKO CHEMICALS
2.00
B
AMISOFT HS-11P
0.3
Glycerin
8.00
Butylene Glycol
4.00
PRODEW 600
2.00
5% NaOH
0.80
Preservative
q.s
Water
balance
Preparation:
1 Dissolve part A at 80oC. 2 Dissolve part B at 80oC. 3 Add part B to part A with stirring and emulsify with homomixier at 3000rpm, 5min. 4 Cool down to room temperature with stirring.Notes:
pH 5.5 Viscosity 25,000-45,000 mPa・s (B type、rotor No.4、12rpm、30sec.、25oC) Stability 45oC, 25oC, 0oC, -5oC, Cycle(-5oC～40oC) for one monthDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
