LAMCO111 HAIR REGENERATING CREAM
Lamberti S.p.A
Preparation:
add the ingredient of phase A (A1,A2,A3) in the given order; under stirring add Esaflor HM22, adjust pH around 5 and let the polymer swell for 20 minutes. When the polymer is completely wetted, add the remaining ingredient of phase A and then add Viscolam AT100P, always under continuous mixing (in this formulation Viscolam AT100P doesn’t need a high shear to form the emulsion). Finally adding the Cetrimonium Chloride, you will find a decrease in emulsion viscosity due to the cationic nature of the conditioner, give some minutes to Viscolam AT100P to recover his structure. When the cream surface has a smooth aspect, add the remaining ingredient and adjust the pH around 3,5.Notes:
Appearance: white cream pH: ~ 3,5 Viscosity (Brookfiled, 5rpm, 25°C): ~ 43000 mPa*sDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Gattefossé is a French-heritage raw material supplier that has grown alongside the world’s leading cosmetics brands. Since our inception in 1880, our journey has been guided by a commitment to excellence and dedication to products shaped with care and time.
We truly believe in the limitless potential of the plant world and continuously explore...
in-cosmetics Global 2025
RAI Amsterdam
8th - 10th April 2025
CITE JAPAN 2025
Pacifico Yokohama
14th - 16th May 2025
