Vivimed Sprayable Sunscreen Formulation Formula Ref. 2-016-23
Vivimed Labs Ltd
Preparation:
1. Combine glycerine, Keltrol and Veegum. Add water with stirring. 2. Once dispersed, add Crodafos MCK and heat to 75-80°C. 3. Combine oil phase ingredients (part A) and heat to 75-80°C. 4. Add oil phase to water phase with stirring. 5. Add Solaveil XT-40W with vigorous stirring. 6. Homogenise for 2 minutes. 7. Allow to cool with stirring. 8. Prepare phase D, stirring until fully dissolved. Add phase D to emulsion at 40-50°C. 9. Add phase E ingredients below 40°C. Continue cooling with stirring to room temperature. 10. Check pH and adjust if necessary to pH 7 - 7.5.Notes:
Test Data: 6280cps / pH7 / in-vitro SPF17 / UVA:UVB ratio 0.919Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Silverson Machines, Inc.
355 Chestnut St. , East Longmeadow, MA 01028
Phone: 413-525-4825
Fax: 413-525-5804
Silverson Machines
High Shear Mixing Equipment for the Cosmetics and Personal Care Industries
Silverson experts understand the mixing challenges you face in the cosmetics industry, such as reducing...
Connex-C Asia 2025
Lee Kong Chian School of Medicine - Ong Tiong Tat and Irene Tan Liang Kheng Auditorium 11 Mandalay Road, Level 4, Singapore 308232
31 July - 1 August 2025
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
