MOISTURISING SHAMPOO
Lubrizol Advanced Materials Asia Pacific Limited
Preparation:
Procedure • Sprinkle Carbopol® Ultrez 20 polymer onto the surface of water. Wait until the polymer has completely “wet out”. Start gentle agitation for 10 minutes. • Add PART A surfactants to the batch with gentle mixing. Heat to 65-70°C. • Neutralize to pH 6.5 with sodium hydroxide solution while mixing. • Melt PART B in a separate vessel by heating to 65-70°C and then add to the batch. Mix until uniform and start cooling with agitation. • At 40°C, add PART C ingredients to the batch in order and mix until uniform. PropertiesNotes:
Properties Appearance: White, shiny milky viscous liquid pH: 6 – 6.6 Viscosity: 4,500-6,600 mPa.s (Brookfield DV-II @ 20 rpm, #4 @ 21°C) Stability: Passed 3 months @ 45°C Passed 5 freeze/thaw cycles Suppliers 1 Noveon 2 GE Toshiba SiliconesDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
We believe that it's possible to replace synthetic raw materials in cosmetic formulations, without compromise. Our easy-to-use, naturally-derived blends are created using safe, raw materials and provide high-performance alternatives to synthetic products. Our range started with sugar chemistry, providing natural ways to thicken oil or water-based...
PCHi 2025
China Import and Export Fair Complex Guangzhou
19-21 February 2025
in-cosmetics Global 2025
RAI Amsterdam
8th - 10th April 2025
