SPF 30 Cream
Preparation:1. Add Purified Water into the main vessel 2. Apply high speed mechanical stirring and individually add and disperse, Disodium EDTA, Euxyl PE9010, Oat COM, Betafin and Glycerin (aqueous phase) 3. Heat this aqueous phase to 70C 4. In a separate vessel mix Cetearyl Alcohol, Montanov 68, Caprylic/capric triglycerides, Oat Lipid e, Xiameter, Crodamol AB, Arlacel 165, Uvinul A Plus B, Tinosorb B (oil phase) 5. Heat and melt this oil phase at 70C 6. With both phases at 70C, slowly add the oil phase to the aqueous phase and homogenise for 2-3 minutes until uniform 7. Add Sepiplus and homogenise for a further 2 minutes until smooth and uniform 8. Cool to ambient with constant mechanical stirring 9. Ensure pH is 5-6
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.