Silicone Free Facial Serum
Oat Cosmetics
Preparation:
Method: 1. Add water into the main vessel. 2. Using high speed mechanical stirring, add Phase A and fully disperse in water. 3. Heat Phase A to 70oC. 3. Once phase A has reached 70oc, add and disperse phase B. 4. In a separate vessel, add the ingredients from phase C and heat to 70oC until melted 5. With both phases at 70oC, add phase C to the main vessel and homogenise for 1 minute to emulsify. 7. Add phase D and homogenise for a further 3-4 minutes until bright, shiny and uniform. 8. Transfer to a stirrer and stir cool to ambient temperature. 9. Make to weight with purified water, record pH and viscosity (adjusting pH if necessary).Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At The FOREFRONT
Everything started at the forefront of sea explorations, between the Varde and Grouin headlands, on the edge of Brittany, a vantage point that affords broad views and a look out to sea. The sea is at the same time our source of inspiration and our primary source of creation.
At the forefront of innovation, we never stop...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025