Vibrant Hair Color Gel, 7.44 Copper Red
Preparation:1. Weigh PART A (dyes and stabilizers). 2. PART B: Heat water to 60 °C. Add propylene glycol. 3. Then, add PART B to PART A. 4. Add PART C ingredient (neutralizer) to the PART A+B and mix until uniform. It is necessary to alkalize PART A+B before adding it into PART D to solubilize PTD and, also, to avoid the precipitation of Chromapol™* 5 polymer. 5. PART D: Add Chromapol™* 5 polymer to the water at room temperature to a main mixing vessel. 6. Add PART A+B+C to main mixing vessel. Mix until uniform.
Notes:Product Properties: Appearance Crystal clear gel pH 10.0 – 10.5 Viscosity (mPa·s)** 20,000 – 25,000 Recommended Packaging: Opaque tube Stability: Passed 3 months at RT and 45°C Polymer (% active) 1.35 **Brookfield DV-II+ Viscometer spindle #6 @ 10 rpm, 25°C @ 24 hours CO-0010(EU) Supplier References: Jos. H. Lowenstein & Sons, Inc. (1, 2, 3, 4, 5, 6, 7) ACEF (9, 10) Lubrizol Advanced Materials, Inc. (12)
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.