CREAM TO POWDER FOUNDATION

Cargill Beauty
This unique, non-volatile, low silicone foundation applies with a creamy texture and finishes with a powder-dry feel. Floramac 10 provides the dry emollient feel and, unlike cyclopentasiloxane materials, is naturally derived and will not evaporate after application.
Phase
Product
INCI Name
Supplier
Volume
A
Floramac 10
Ethyl Macadamiate
Floratech
29.33
SF 1550
Phenyl Trimethicone
Momentive Performance Materials
1.00
Permethyl® 102A
Isoeicosane
Presperse Corporation
q.s
Dow Corning® 9506 Powder
Dimethicone/Vinyl Dimethicone Crosspolymer
Dow Corning Corporation
1.50
B
Performalene® 400 Polyethylene
Polyethylene
New Phase Technologies / Baker Hughes
3.65
Candelilla Wax SP 75
Euphorbia Cerifera (Candelilla) Wax
Strahl & Pitsch Inc.
2.36
Syncrowax HR-C
Tribehenin
Croda, Inc.
0.50
Microcrystalline Wax SP 18
Microcrystalline Wax
Strahl & Pitsch Inc.
1.60
C
Titanium Dioxide (Oil Dispersed)
Titanium Dioxide
Emerald Performance Materials
14.50
Unipure LC® Yellow 182
Iron Oxides
Sensient Cosmetic Technologies
1.50
Pur Oxy Black BC (34PC3190E)
Iron Oxides
Emerald Performance Materials
0.15
Unipure LC® Red 381
Iron Oxides
Sensient Cosmetic Technologies
0.45
RonaFlair® White
Sodium Potassium Aluminum Silicate (and) Silica (and) Titanium Dioxide
EMD Chemicals
11.00
Tres BN® PHP1109
Boron Nitride
Saint-Gobain Advanced Ceramics
0.50
Ganzpearl® GM-0600
Polymethyl Methacrylate
Presperse Corporation
5.50
Spheron P-1500
Silica
Presperse Corporation
3.50
Natrasorb® HFB
Aluminum Starch Octenylsuccinate (and) Acrylates Copolymer (and) Magnesium Carbonate
AkzoNobel Chemicals
5.50
D
Eusolex® 2292
Ethylhexyl Methoxycinnamate (and) BHT
EMD Chemicals
6.20
Oxybenzone, USP
Benzophenone-3
Essential Ingredients
2.06
Preservative1
- - - -
- - - -
q.s
Covi-Ox® T 70 C
Tocopherol
BASF Corporation
0.10
RTD Alpha-Bisabolol Natural
Bisabolol
The HallStar Company
0.20

Preparation:

Mixing Procedure 1. Mix Phase A at 85-90°C with propeller agitation. 2. Mix all components of Phase B at 95°C and stir until homogeneous. Add Phase B to Phase A and keep the temperature of the mixture at 90°C. 3. With the aid of a homomixer, add each ingredient of Phase C to Phase AB. Continue to homomix this combination at 90°C to ensure uniform pigment dispersion. 4. Mix all components of Phase D at 70°C. Cool Phase ABC down to 70°C and add Phase D with homomixing agitation. 5. Pour final mixture, while hot in liquid form, into containers and cool to room temperature.

Notes:

Typical Properties: Relative Strength: 0.15 - 0.3 kg Penetration: 175 - 250 dmm
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Latest Issues

Gattefossé

Gattefossé is a French-heritage raw material supplier that has grown alongside the world’s leading cosmetics brands. Since our inception in 1880, our journey has been guided by a commitment to excellence and dedication to products shaped with care and time.
We truly believe in the limitless potential of the plant world and continuously explore...

Learn more »

Connex-C Asia 2025

Lee Kong Chian School of Medicine - Ong Tiong Tat and Irene Tan Liang Kheng Auditorium 11 Mandalay Road, Level 4, Singapore 308232
31 July - 1 August 2025

IFSCC Congress 2025

Palais des Festivals, Cannes
15th - 18th September 2025