24-Hour Tinted Moisturizer
Preparation:Mixing Procedure 1. Place the Carbopol Ultrez 10 into the deionized water at room temperature. Allow for the Carbopol Ultrez 10 to hydrate. Heat the solution to 70°C with propeller agitation. 2. Disperse the preservative in the Glycerin, USP and heat the mixture to 70°C. Add this to Phase A with propeller agitation. 3. Mix all components of Phase B together and heat to 70°C. With rapid propeller agitation, add Phase B to Phase A to form the emulsion. 4. Add Phase C to Phase AB with propeller agitation. Move the mixture to the homogenizer and agitate until a smooth cream is formed. 5. Dissolve the Floraesters K-20W Jojoba in the deionized water of Phase D. Add to the mixture while using the homogenizer to blend the formula. 6. Add all ingredients of Phase E to the mixture using the homogenizer to disperse and blend each one completely into the mix. 7. Dissolve the Florasolvs PEG-150 Hydrogenated Jojoba in the deionized water of Phase F at 70°C. Add this solution to the mixture while using the homogenizer to blend the formula. Cool the mixture to room temperature.
Notes:1 Preservative: Sodium Benzoate NF-FCC Dense (INCI: Sodium Benzoate) supplied by American International Chemical
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.