Pearlized Conditioning Shampoo With Floraesters K-20W Jojoba
Preparation:Mixing Procedure 1. Add the Versene Na2 Crystals to deionized water with propeller agitation at room temperature and allow time to dissolve. 2. Add the Propylene Glycol USP/EP, Preservative, and UCARE Polymer LR 400 of Phase A, in that order, with propeller agitation. Heat mixture to 70-75°C. 3. With propeller agitation at 70-75°C add the ingredients of Phase B to Phase A in the order listed. Continue to mix until the batch is uniformly white in color and homogeneous. 4. Allow the batch to cool while stirring to room temperature. Measure final pH and viscosity at 25°C. Note: Sodium chloride is not added to modify the viscosity of this formula. Floraesters K-20W Jojoba has a strong effect on the final viscosity. If a lower viscosity is desired, a small amount of sodium chloride solution may be added after the batch is completed.
Notes:Typical Properties: pH: 5 - 6 Viscosity: 14,000 - 23,500cP 1 Preservative: Sodium Benzoate NF-FCC Dense (INCI: Sodium Benzoate) supplied by American International Chemical 2 Preservative: Bronidox® 1160 (INCI: Phenoxyethanol) supplied by BASF Corporation 3 Fragrance: Reference #03294 supplied by Innovation Corporation
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.