Soft Touch Sun Milk Kids LSF 30

Aako BV
This Soft touch Sun milk for Kids with LSF 30 is a very mild and smooth formulation with a broad range protection level. The calculated SPF is 32, calculated UVA-PF is 12,4 and the ratio is 2,4. The addition of tetrasodium EDTA in phase 1 is to avoid discoloration of AakoSun AVB with Fe2+. The AakoEmu PCP is completely free of halogenated compounds and in this formulation it act as an very mild emulsifier and provides also a boosting effect to the LSF level. Due to this ingredient very small droplets will be formed and gives an extra soft feeling on the skin.
Phase
Product
INCI Name
Supplier
Volume
A
Aqua/water
Aqua/water
- - - - -
63.19
Glycerin
Glycerin
Univar
5.50
Panthenol 75
Phanthenol
Aako / Kyowa
1.33
Carbopol Ultrez 20
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Lubrizol
0.15
AakoSun PBSA
Phenylbenzimidazole Sulfonic Acid
Aako
0.70
Potassium hydroxide
Potassium hydroxide (20%)
Brenntag
1.00
Trilon B (liquid)
tetrasodium EDTA
BASF
0.03
B
AakoEmu PCP
Potassium Cetyl Phosphate
Aako
1.80
Tegin 4100
Gyceryl Stearate
Evonik
1.00
Leunapol 1618
Cetearyl Alchol
Aako / Leuna Tenside
1.50
Escalol S / Tinosorb S
Bis-Ethylhexyloxyphenol Methoxyphenyl Triazine
ISP/BASF
1.00
AakoSun OCR
Octocrylene
Aako
6.00
AakoSun AVB
Butyl Methoxydibenzoylmethane
Aako
3.00
AakoSun TiO2 SL
Titanium dioxide, Silica
Aako
1.50
AakoSun EHS
Ethylhexyl Salicylate
Aako
4.80
Ultrafeel MCT
Capic/caprylic triglyceride
Aako / Natura-Tec
3.00
Ultrafeel AB
C12-C15 Alkyl Benzoate
Aako / Natura-Tec
3.00
C
Nipaguard PO 5
Phenoxyethanol, Piroctone Olamine
Aako / Clariant
1.00
Fragrance
- - - -
- - - -
0.30
Vitamin E Acetate
Tocopheryl Acetate
Aako / Kyowa
0.20

Preparation:

Procedure: - Heat water phase 1 and oil phase 2 separately to 70 °C under stirring -Homogenize the oil phase (phase 2) for 2 min. with Ultra Turrax at max. speed to finely disperse the Titanium Dioxide at 70 °C - Add the oil phase to the water phase under stirring at 70 °C - Homogenize the emulsion for 2 min with Ultra Turrax at max. speed - Cool down under stirring to 45 °C, add phase 3 and homogenize for 1 min at max. speed. Cool down to 30 °C and adjust the pH to 6,2-6,5
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Latest Issues

FLAVEX Naturextrakte GmbH

FLAVEX specializes in the gentle production of lipophilic plant extracts by extraction with supercritical carbon dioxide as a natural solvent. The clean and environmentally friendly extraction technology preserves the entire spectrum of sensitive top notes and bioactive substances of herbs and spices, e.g. antioxidants, natural flavours, essential...

Learn more »

in-cosmetics Korea 2025

COEX, Seoul
2nd - 4th July 2025

Breakthrough Science & Claims Testing - The SCS Annual Conference

Royal College of Surgeons of England, London
2 - 3 July