ULTRA-RESHAPING BODY3 GEL-CREAM
Preparation:Manufacturing Procedure: 1. Heat A, B and D up to 70-75°C. Add Ecogel™ under medium stirring and keep medium stirring for 20 minutes to hydrate phospholipids. 2. Add B into A under medium stirring and maintain stirring rate for 5 minutes. 3. Increase stirring rate up to maximum level with a rotor stator blender for 1 minute. 4. Add C under maximum stirring (5000 rpm) and mix until the product is homogeneous. 5. Add D slowly into ABC under medium stirring. 6. Cool down under medium stirring. 7. Add premix D, ingredients of E, F and G one after the other below 40°C. 8. Adjust the pH if necessary.
Notes:Formula Specifications: Aspect: Off-white, bright gel cream Viscosity (Rheo ELV 8, spindle 4, 6 rpm, 3 min): 20 000 - 35 000 mPa.s pH: 5.0 - 5.5 Centrifugation (3000 rpm, 20 min): Stable * = Distributed in France by Lucas Meyer Cosmetics and Unipex Solutions
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.