Preparation:Manufacturing Procedure: 1. Prepare phase B: grind each pigment at 50% in glycerin (three times in a three roll mill). 2. Heat A and C up to 80-85°C. Keep A at 80-85°C under medium stirring for 20 minutes to hydrate phospholipids. 3. Add B into A under slow stirring. 4. Add C into AB under medium stirring and maintain stirring rate for 5 minutes to emulsify. 5. Increase stirring rate up to maximum level for 3 minutes. 6. Cool down under medium stirring. 7. Add ingredients of D one after the other below 40°C. 8. Adjust the pH if necessary.
Notes:Formula Specifications: Aspect: Beige smooth cream. Viscosity (RHEO ELV8, Spindle 4, 6 rpm, 3 min): >100 000 mPa.s pH: 5.0 - 5.5 Centrifugation (3000 rpm, 20 min): Stable * = Distributed in France by Lucas Meyer Cosmetics and Unipex Solutions. **= Non compliant with Ecocert standards.
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.