Preparation:Manufacturing Procedure: 1. Heat A up to 75-80°C. 2. Add B in A and stir until the product is homogeneous. 3. Cool down under stirring. 4. Add ingredients of C one after the other into AB under slow stirring during cooling phase. 5. Add D below 40°C. 6. Adjust the pH if necessary.
Notes:Formula Specifications: Aspect: Off-white/yellow slightly viscous gel Viscosity (Rheo ELV8, Spindle 4, 6 rpm, 3 min): 10 000 - 20 000 mPa.s pH: 5.0 - 5.5 Centrifugation (3000 rpm, 20 min): Stable * = Distributed in France by Lucas Meyer Cosmetics and Unipex Solutions.
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.