Total Pore-Control Astringent
Preparation:1. In the main vessel, mix all ingredients of Phase A with propeller agitation at room temperature. 2. In a separate vessel, mix ingredients of Phase B with propeller agitation at room temperature. 3. Add Phase B to Phase A with propeller agitation at room temperature. 4. Add ingredients of Phase C to Phase AB in the order listed.
Notes:1 Preservative: Potassium Sorbate FCC (INCI: Potassium Sorbate) supplied by TRI-K Industries Inc. 2 Preservative: Bronidox® 1160 (INCI: Phenoxyethanol) supplied by BASF Corporation 3 To prepare Violet (1.5% Solution), combine the following ingredients and mix until dissolved. Typical Properties: pH: 7 - 9 Note: The information herein is based on our research and the research of others and is believed to be accurate. No guarantee of accuracy is made and the products are provided without warranty, expressed or implied and upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes. Likewise, statements concerning the possible use of these products are not intended as recommendations to use these products in infringement of any patent or in the treatment, prevention, or cure of any medical condition. INCI/trade names must be verified with each manufacturer. (Cleared for Public Disclosure)
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.