Preparation:1. Heat the deionized water of Phase A to 75-80°C. Add the Tween 61 with moderate propeller agitation. 2. In a separate vessel, mix all ingredients of Phase B. 3. Add Phase B to Phase A at 75-80°C with moderate propeller agitation. After the Keltrol CG-T is completely hydrated, switch the agitation to homomixing (square-hole head, typical). Mix at medium-high speed until uniform. 4. Add the ingredients of Phase C to Phase AB in the order listed with high-speed homomixer agitation. Continue mixing at 75-80°C with high-speed homomixer agitation until all pigments are completely ground and the color appears uniform. 5. Combine the ingredients of Phase D and heat to 75°C with propeller agitation. Add this to Phase ABC with homomixer agitation. After Phase D is completely mixed, switch to moderate propeller agitation and continue mixing until the mixture appears uniform. 6. Mix the ingredients of Phase E. Add Phase E to Phase ABCD at 75-80°C and mix with moderate propeller agitation until the mixture appears uniform. Begin cooling. 7. At 45-50°C, add the ingredients of Phase F in the order listed with moderate propeller agitation. Compensate for deionized water loss by weight. Continue mixing with moderate propeller agitation until the mixture reaches room temperature.
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.