Sunboost SPF 50 NAD062-11-01A
Preparation:Prepare Phase A, using a suitable dispersion unit (e.g., Silverson, IKA Ultra-Turrax®) to disperse the thickener. Heat to 70–75°C. Prepare Phase B separately and heat to 70–75°C. Add Phase B to Phase A using a suitable dispersion unit to homogenize. Cool to 40°C using a water bath under gentle stirring. Add Phase C and homogenize for a few minutes using a suitable dispersion unit. Cool to room temperature while stirring.
Notes:1 Sigma Aldrich 2 Solvay Novecare 3 Innospec Active Chemicals 4 HallStar Italia 5 BASF 6 ACEF 7 HallStar 8 Stearinerie Dubois 9 Dr. Formenti 10 Evonik
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.