Non-Nano Sunscreen Featuring GCP55TEL And GC70MZCJ-G

Kobo Products Inc

Phase

Product

INCI Name

Supplier

Volume

Deionized Water

37.63

Sodium Chloride

Morton Salt

0.90

Allantoin

RITA Corp

0.20

Finsolv® TN

C12-15 Alkyl Benzoate

Finetex

20.04

GCP55TEL

Titanium Dioxide (And) Caprylic/Capric Triglyceride (And) Alumina (And) Silica (And) Polyhydroxystearic Acid

Kobo Products

11.90

GC70MZCJ-G

Zinc Oxide (And) Caprylic/Capric Triglyceride (And) Jojoba Esters (And) Glyceryl Behenate/Eicosadioate

Kobo Products

6.62

ABIL® WE 09

Polyglyceryl-4 Isostearate (And) Cetyl PEG/PPG-10/1 Dimethicone (And) Hexyl Laurate

Evonik

3.00

ABIL® Wax 9801

Cetyl Dimethicone

Evonik

3.00

Cetiol® CC

Dicaprylyl Carbonate

Cognis Corp.

3.00

Floraesters® 15

Jojoba Esters

Floratech

3.00

Arlacel™ P135

PEG-30 Dipolyhydroxystearate

Croda

2.50

Cetiol® SB 45

Shea Butter

Cognis Corp.

1.00

Methyl Paraben NF

Methylparaben

0.15

Propyl Paraben NF

Propylparaben

0.06

Aculyn™ 44

PEG-150/Decyl Alcohol/SMDI Copolymer

Rohm & Haas

3.00

BPA-5I5

Polymethyl Methacrylate (And) Isopropyl Titanium Triisostearate

Kobo Products

4.00

Preparation:

1. In a double jacketed stainless steel tank equipped with a lightening type mixer along with side sweep action, mix ingredients in Part 1 in the order listed. 2. Heat Part 1 to 75°C. 3. In a second double jacketed stainless steel tank equipped with a lightening type mixer heat Part 2 to 75°C. 4. Add Part 1 to Part 2 very slowly with mixing using a lightening type mixer. 5. Cool product slowly down to about to 45°C. 6. Add Part 3 to main batch, one ingredient at a time, in the order listed. 7. Switch mixing to side sweep. 8. Cool emulsion further to 33°C with sweep action mixing. 9. Add Part 4 under propeller. 10. Homogenize at 4500 rpm for approximately 10 minutes.

Notes:

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Featured Supplier

Since 1984, MMP, Inc. brings a concept of highly individualized assistance and service, striving to provide our clientele with unique resources. At MMP our mission is to manufacture raw materials of the highest quality for cosmetic and personal care applications with customized service. Our team is continuously working on the development of...

Learn more »