Premium Firming Sleeping Mask For Dry Skin CPD086-12-06A
Preparation:Prepare phase B, separately warming the water to 75°C–80°C and the lipophilic components to 70°C–75°C. Add the lipids to the water, homogenizing using a suitable dispersion unit, such as Silverson, Ultra Turrax, etc. Cool phase B to 40°C, using a water bath while stirring. Prepare phase A and disperse the thickeners using a suitable dispersion unit. Combine phase A and phase B with mixing. One by one, add phases C–G to phase A–B, homogenizing using a suitable dispersion unit.
Notes:Properties APPEARANCE: Shiny and soft gel-cream, good spreadability, silky after-feel. VISCOSITY: 16,000 – 23,000 mPa?s (10 rpm, Brk. RVDV-E, Sp. T-5, after 24 h at room temperature pH: 6.0 – 7.0 Suppliers 1 Sigma Aldrich 2 ACEF 3 Innospec Active Chemicals 4 Lubrizol 5 Clariant 6 HallStar Italia 7 Oxiris Chemicals 8 Aromtech 9 Evonik 10 Momentive 11 Shin Etsu 12 AkzoNobel 13 Schülke & Mayr 14 Biochim
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.