Anti-Ageing Infrared Protection Serum With VENUCEANE™ SED1111981 G
Phase
Product
INCI Name
Supplier
Volume
A
Water deionised
qsp 100
Optasense RMA-52 [Sodium Polyacrylate (and) Paraffinum Liquidum (and) Trideceth-6]
0.35
B
Cyclopentasiloxane (and) Cyclohexasiloxane
2.00
Crodamol AB-LQ-(RB)
C12-15 Alkyl Benzoate
Croda
4.50
Cromollient DP3A-LQ-(MH)
Di-PPG-3 Myristyl Ether Adipate
Croda
1.00
Crodamol GTEH LQ-(MH)
Triethylhexanoin
Croda
2.00
Crodamol CSO-LQ-(JP)
Ceteraryl Ethylhexanoate
Croda
3.00
Optasense G82
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Croda
0.15
C
Glycerin
5.00
Phenoxyethanol
qs
D
Potassium Sorbate
0.10
E
Water deionised
1.30
Sodium hydroxide 30%
0.13
F
Venuceane™
Thermus Thermophillus Ferment (and) Glycerin
Sederma
3.00
G
Fragrance (Orchid)
0.10
Preparation:
Disperse the Optasense RMA-52 in the water with Staro stirring (s=1000 rpm). Weigh and mix Part B. Weigh and mix Part C. Weigh Part D. Add Part B to Part A with strong Staro stirring (s=2700 rpm). Extemporaneously, add Part C, then Part D to Part A+C. Neutralize with Part E and allow stirring with Staro (s=1000) for 30 minutes. Add Part F, homogenize well. Add Part G, homogenize well. Check pH at 6.00 +/- 0.10Notes:
Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
