Cuti-Seal Leave In Therapy HC-34
Preparation:1. In an appropriately sized container add Deionized water and begin mixing while heating to 70-75°C. 2. Add Hydroxyethylcellulose with moderate mixing and mix until fully dispersed. 3. Begin cooling, add Lipocol HCO-40, Glycerin and Dow Corning Fluid 193 C Fluid, mixing well between each addition. 4. At a temperature of 50-55°C add Betafin™ BP-20 and mix until dissolved. 5. Add Cetrimonium Chloride, mix well. 6. When the temperature of the batch is at 40°C or below, add pre-mix of Fragrance and Liposorb L-20. 7. Add the remaining ingredients mixing well between each addition.
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.