BATH & SHOWER GEL

Phase
Product
INCI Name
Supplier
Volume
A
Deionized Water
Water
qs to 100%
Jordapon CI Prilled1
Sodium Cocoyl Isethionate
2.000%
Standapol WAQ-SP2
Sodium Lauryl Sulfate
19.000%
Standapol ES-22
Sodium Laureth Sulfate
16.000%
Merquat 39403
Polyquaternium-39
0.750%
Merquat 7403
Polyquaternium-7
0.250%
Mackamide C4
Cocamide DEA
3.000%
Mackam 2C-LV4
Disodium Cocoamphodiacetate
3.000%
Disodium EDTA
Disodium EDTA
0.050%
FD&C Blue No.1 (1.0% Solution)
FD&C Blue No.1
0.035%
DMDM Hydantoin
DMDM Hydantoin
0.300%
Arylessence #AA082256 Passionfruit Pomegranate5
Fragrance
0.400%
Citric Acid
Citric Acid
qs to pH 6.7 +/- 0.1
Sodium Chloride
Sodium Chloride
qs to 5000-7000 cps

Preparation:

Procedure 1. Heat water to 40°C and slowly sprinkle in sodium cocoyl isethionate. Mix until dissolved. 2. Add remaining ingredients one at a time in the order listed, mixing well after each addition. 3. Adjust pH to 6.7 +/- 0.1 with Citric Acid. 4. Adjust to desired viscosity with Sodium Chloride. Mix well.

Notes:

Suppliers 1. BASF 2. Cognis 3. Nalco 4. McIntyre 5. Arylessence
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.