Sprayable Sunscreen Lotion With High SPF (O/W) In Vivo SPF 57 SM-03-05

Phase
Product
INCI Name
Supplier
Volume
A
Eusolex® 232
PHENYLBENZIMIDAZOLE SULFONIC ACID
1
2.50
Eusolex® UV-Pearls® OMC
AQUA (WATER), ETHYLHEXYL METHOXYCINNAMATE, SILICA, PVP, PHENOXYETHANOL, METHYLPARABEN,PROPYLPARABEN, BHT
1
2.50
RonaCare® Ectoin
ECTOIN
1
0.10
Keltrol RD
XANTHAN GUM
2
0.10
Tris(hydroxymethyl)-aminomethane
TROMETHAMINE
1
0.70
Glycerol, anhydrous
GLYCERIN
1
7.00
Complexing agent
qs
Water, demineralized
ad 100
B
Eusolex® T-OLEO
BUTYLENE GLYCOL DICAPRYLATE/DICAPRATE, TITANIUM DIOXIDE, SILICA, POLYGLYCERYL-2DIPOLYHYDROXYSTEARATE
1
9.00
Eusolex® OCR
OCTOCRYLENE
1
6.00
Eusolex® OS
ETHYLHEXYL SALICYLATE
1
5.00
Eusolex® HMS
HOMOSALATE
1
7.00
Eusolex® 9020
BUTYL METHOXYDIBENZOYLMETHANE
1
4.50
RonaCare® AP
BIS-ETHYLHEXYL HYDROXYDIMETHOXY BENZYLMALONATE
1
1.00
Tinosorb S
BIS-ETHYLHEXYLOXYPHENOL METHOXYPHENYL TRIAZINE
3
3.50
Eumulgin B 2
CETEARETH-20
3
1.50
Antaron V-216
PVP/HEXADECENE COPOLYMER
4
1.00
Syncrowax HGLC
C18-36 ACID TRIGLYCERIDE
5
1.00
Pemulen TR-2
ACRYLATES/C10-30 ALKYL ACRYLATE CROSSPOLYMER
6
0.35
C
Ethano 96%
Alcohol
1
4.00
Preservatives
qs

Preparation:

Mix water and Tris(hydroxymethyl)-aminomethane of phase A. Add Eusolex 232 while stirring, add Keltrol and proceed stirring until a homogeneous gel has formed. Add remaining ingredients of phase A. Heat phase A to 75°C. Mix phase B in a separate vessel, heat to 75°C and homogenize short-term if necessary. Add phase B to phase A while stirring and homogenize. Cool down to 40°C. Below 40°C add ingredients of Phase C one after the other. Adjust pH to pH 7.0 to 7.5.

Notes:

pH23°C: 7.0-7.5Viskosity: 2000 mPa.s (Brookfield RVTDV II-, Sp. Helipath C, 10 rpm) at 23°C The Radical-Protection-Complex (RPC) consist of three lines of defense, against free radicals:1. Step UV-A/B Filter, dimishing UV induced radical formation2. Step Ronacare AP = Antioxidant - neutralizes free radicals 3. Step Ronacare® Ectoin = Protects the cells agains external stress (1) Merck KGaA, Darmstadt, Germany / EMD Chemicals (2) C. P. Kelco (3) BASF AG (4) ISP Global Technologies (5) Croda GmbH (6) Lubrizol
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.