Preparation:Preliminary phase Prepare a 25% solution of Andean QD Ultra in deionised water under cupboard Phase C: Mix the ingredients until clear solution; Addition scheme 1) In the main mixer, add ingredients A and heat the phase to 65°C until completely melt. 2) Stop heating and add, slowly and in sequence, ingredients B while mixing with blades for 10’ after each addition. Check the homogeneity after each addition. 3) Add Phase C and mix with blades for 5’. 4) Add, in sequence, ingredients D and E and mix for 5’ after each addition. 5) Cool to room temperature. Take a sample for analytical controls.
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.