PROTECTIVE BODY BUTTER
Croda Singapore
Preparation:
1. Weigh MixXIN ME in a beaker. Add in Part A ingredients one by one with stirring, ensuring homogeneity before adding the next ingredient. 2. Slowly, add water with mixing at moderate to high speed until all the water has been emulsified ( minimum 15 minutes). 3. Lastly, add OptaSense RMA-IS and mix well. If desired, adjust pH to 6-6.5 with Triethanolamine.Notes:
Appearance: Light yellow, glossy cream. Viscosity: 29,900 cPs (DV-II+, spindle 6, 20rpm at 1 min) Stability: Pass 3 months @ RT and 40oC ; 1 month @ 50oCDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
We believe that it's possible to replace synthetic raw materials in cosmetic formulations, without compromise. Our easy-to-use, naturally-derived blends are created using safe, raw materials and provide high-performance alternatives to synthetic products.
Details of our full product range can be viewed here.
Interested in our products? ...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025