ENERGIZING PLEASANT EMULSION NATURAL TOUCH! EU07237A
Seppic
Preparation:
Trimix – 3 kg): Introduce phase A into the tank and heat at 80°C. Weigh and heat phase B separately in a water bath at 80°C under agitation, then add phase C. Add combined phase BC into the tank (phase A) and emulsify. Cool down until 63°C to obtain a smooth, shiny emulsion. Add phase D and emulsify for 3 minutes more under vacuum. Adjust temperature to 35°C, then blend again for 10 minutes. Cool down in stages when temperature reaches 25°C, measure pH (adjust if different from 5.0-5.5).Notes:
Properties Appearance: White and smooth shiny emulsion pH: 5.1 Viscosity: 1M at RT 24 900 mPa·s S4S6; 1M at 45°C 8 400 mPa·s S3S6; Recovery at RT (after 1M at 45°C) 24,300 mPa·s S4S6 Stability: 1M at RT, 45°C Suppliers 1 Stearineries Dubois 2 Seppic 3 Laserson 4 Akzo Nobel 5 ManeDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
DERMACLAIM – COSMETIC TESTING LABORATORY
Dermaclaim Lab is a Dermocosmetic Testing Laboratory focused on the Substantiation of Efficacy Claims for active ingredients and end-products, through in vitro bioassays and clinical testing in human volunteers.
Our R&D testing services help you to demonstrate the efficacy of your...
17th Sun Protection Conference 2025
Royal College of Physicians, London
24 - 25 June 2025
in-cosmetics Korea 2025
COEX, Seoul
2nd - 4th July 2025
