SMOOTH FOUNDATION G3052-242.02

Phase
Product
INCI Name
Supplier
Volume
A
Gransil EP-9
Polysilicone-11 and Water and Laureth-12 and Phenoxyethanol and Ethylhexylglycerin
5.00
Dimethicone, 5cst
Dimethicone
20.00
Gransurf 67
PEG-10 Dimethicone
2.00
Gransurf 50C
Dimethicone and PEG/PPG-18/18 Dimethicone
2.00
Euxyl PE 9010
Phenoxyethanol and Ethylhexylglycerin
1.00
Bentone 38V
Disteardimonium Hectorite
0.60
B
Suncroma Yellow Iron Oxide
Iron Oxide
1.31
Suncroma Red Iron Oxide
Iron Oxide
0.40
Suncroma Black Iron Oxide
Iron Oxide
0.13
RBTS-MS3
Titanium Dioxide (CI 77891) and Methicone
6.58
Sericite DNN
Mica
6.58
Dimethicone, 5cst
Dimethicone
7.50
Gransurf 67
PEG-10 Dimethicone
2.50
C
Deionised Water
Water
35.40
Butylene Glycol
Butylene Glycol
5.00
Jeecide CAP-5
Phenoxyethanol and Caprylyl Glycol and Potassium Sorbate and Water and Hexylene Glycol
3.00
Veegum HV
Magnesium Aluminum Silicate
1.00

Preparation:

Combine phase A in the main kettle and homogenize at 1,000 to 1,500 rpm until uniform. Combine phase B and run ball mill until the drawdown passes 10 micron on Hegman Gauge. Combine phase C in the support kettle and mix until all solids are dissolved. Add phase B into the main kettle while homogenising and continue mixing for at least 20 minutes. Add phase C very slowly to the main kettle while homogenising. At the end, increase to speed to 1,500 to 2,500 to finish the batch.

Notes:

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.