Anti-Aging Lotion With Resveratrol Formula JZ4-83

Phase
Product
INCI Name
Supplier
Volume
A
Water
(aqua) (deionized)
70.86
B
Versene™ 220 Crystals1
Tetrasodium EDTA
0.02
C
Rhodicare® XC2
Xanthan Gum
0.20
D
Propylene Glycol USP3
Propylene Glycol
3.00
CoSept™ PEP4
Phenoxyethanol, Methylparaben, Ethylparaben, Butylparaben, Propylparaben, Isobutylparaben
0.60
E
HallStar® GC4
Caprylic/Capric Triglycerides
5.00
BioChemica™ Grape Seed Oil -– Refined™4
Vitis Vinifera (Grape) Seed Oil
3.00
BioChemica™ Walnut Oil – Ultra Refined™4
Juglans Regia (Walnut) Oil
2.00
BioChemica™ Shea Butter – Ultra Refined™4
Butyrospermum Parkii (Shea Butter)
3.00
F
HallStar® GMS Pure4
Glyceryl Stearate
0.44
HallStar® GMS SE/AS4
Glyceryl Stearate, PEG-100 Stearate
3.00
HallStar® TA-1618 Cetearyl Alcohol4
Cetearyl Alcohol
0.70
G
SolaStay® S14
Ethylhexyl Methoxycrylene
4.00
RTD™ HC-404
PEG-40 Hydrogenated Castor Oil
1.00
H
BioChemica™ Vitamin E Natural4
Tocopherol
1.00
BHT5
BHT
0.08
Regu®-Fade6
Resveratrol
0.10
I
MSS-500W7
Silica
2.00

Preparation:

To a suitable vessel equipped with mixing, heating and cooling capabilities, add A and B and start mixing. When B is dissolved, add C. When C is fully hydrated, start heating to 140°F (60°C). Premix D and add during the heating of this water phase. In a separate vessel combine E, start mixing and heat to 158°F (70°C). Add F in order. Mix until homogeneous and then cool this oil phase to 149°F (65°C). In another vessel, add G and heat to 140°F (60°C), mixing well. Add H, in order, to G with mixing. When homogeneous, add G–H to E–F with mixing. When both are homogeneous and at their designated temperatures, immediately add the oil phase (E–H) to the water phase (A–D) with continued mixing at a high shear for two minutes. Homogenize for 10 minutes and then resume mixing and start cooling. At 122°F (50°C) or lower, add I and mix well. Cool to ambient temperature and then add water as needed to bring to full batch mass. When again uniform, stop mixing and perform final quality assurance checks.

Notes:

PRODUCT PROPERTIES (25°C) Appearance: Light yellow lotion Viscosity (RV, T-D, 5, 20 & 100 rpm, cP): 12000, 4000 & 1240 pH: 5.8 SUPPLIERS 1Dow Chemical 2Rhodia 3Lyondell 4HallStar 5Merisol Antioxidants 6DSM Nutritional 7Kobo Products
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.