Broad Spectrum SPF ~70, PFA (PPD) ~28 Sunscreen Cream JZ3-201
Hallstar
Preparation:
Add A to main vessel and start center-stir (prop) mixing. When dissolved, add B and mix until fully incorporated. Start heating to 85°C, and add preblended C. To a secondary vessel, add D and start mixing. Add E, heat to 85°C, then add F, in order. When DEF is homogeneous, add G and mix until well dispersed. Add H and mix until well dispersed. With both phases at 85°C and homogeneous, add oil phase (DEFGH) to water phase (ABC) with stirring. After mixing for five minutes, start cooling and homogenize until batch reaches 55°C. Add I and homogenize for two minutes; then resume sweep mixing with continued cooling. At 50°C or lower, add J. When again smooth, add K, replace any water lost to evaporation, and mix until smooth. When at desired filling temperature, stop cooling and mixing, perform final quality assurance checks and package product.Notes:
PRODUCT PROPERTIES (25°C) Appearance: Off-white cream Viscosity (RV, T-D, 5, 20 & 100 rpm, cP): 58000, 16800 & 4640 pH: 6.2 Stability: Passed three freeze-thaw cycles, and 6 months at 45°CDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
LipoTrue opens the door to further and more innovative science and technologies, overflowing with new concepts and novel active ingredients the dynamic and fast-changing cosmetic market. LipoTrue acts as a central R&D engine integrating cutting edge technology platforms in order to provide advanced active ingredients with proven and solid...
in-cosmetics Asia 2025
                BITEC, Bangkok, Thailand
                4th - 6th November 2025
            
SCS Formulate 2025
                Coventry Building Society Arena, UK
                11th - 12th November 2025