FLUID AND NON GREASY SPRAYABLE CARE FOR OILY SKINS 6758A
Preparation:Disperse the aluminium/magnesium silicate into the cold water. Heat the aqueous phase to 70-75°C. Introduce MONTANOV L in the heated aqueous phase. When melted, add the oil then start the emulsifier. Add the SEPICONTROL A5 directly, stop the emulsifier after few minuts then start cooling the emulsion. Introduce the ingredients of phase B at around 30°C.Adjust the final pH.
Notes:Comments MONTANOV L An eco-emulsifier which is perfectly adapted to the production of fluid to very fluid formulae. Its use in a formulations facilitates their stabilisation even in the presence of active ingredients which have a high electolyte content. SEPICONTROL A5 An active ingredient for greasy skin which regulates the 5 elements responsible for skin defects (bacterial prolifération, lipases, 5 α-reductase, inflammation, elastases and free radicals).The skin becomes cleaner, less greasy and free of its defects. Characteristics Appearance A fluid,peach coloured emulsion Viscosity Approximately 500 cps BROOKFIELD LV2 6rpm pH Approximately 5 Stability Stable at room temperature – 40°C & 50°C and after freezethaw cycles – 5/+40°C Assessment 3460mm2 (method 57CO035) Notes Fragrance: AGNES X010033 (QUEST) Magnesium aluminium silicate: VEEGUM HS (VANDERBILT)
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.