Moisturizing Collagen Boosting Cream

Phase
Product
INCI Name
Supplier
Volume
A
AXOL® C 62 Pellets
Glyceryl Stearate Citrate
1.5
TEGIN® M Pellets
Glyceryl Stearate
3.0
TEGO® Alkanol 18
Stearyl Alcohol
2.0
-
Stearic Acid
1.0
TEGOSOFT® G 20
Octyldodecanol
9.0
TEGOSOFT® APM
PPG-3 Myristyl Ether
4.5
TEGOSOFT® M
Isopropyl Myristate
6.0
TEGO® Arjuna
Terminalia Arjuna Bark Extract
0.2
B
TEGO® Pep 4-17
Tetrapeptide-21; Glycerin; Butylene Glycol; Aqua
3.0
-
Glycerin
3.0
-
Water
65.8
C
TEGO® Carbomer 134
Carbomer
0.2
TEGOSOFT® M
Isopropyl Myristate
0.8
D
-
Sodium Hydroxide (10 % in water)
qs
E
-
Preservative, Perfume
qs

Preparation:

1.Heat phase A and B separately to approx. 80 °C. 2.Add phase A to phase B with stirring1). 3.Homogenise. 4.Cool with gentle stirring to approx. 60 °C and add phase C. 5.Homogenise for a short time. 6.Cool with gentle stirring and add phase D below 40 °C. 1) Important: If phase A has to be charged into the vessel first, phase B must be added without stirring.

Notes:

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.