ULTRA RICH SHOWER OIL

Phase
Product
INCI Name
Supplier
Volume
A
MIPA Laureth Sulphate (and) Proplylen Glycol
30.00
PEG-18 Castor Oil Dioleate
5.00
Sensolene®/Ethylhexyl Olivate
7.00
Cocamidopropyl Betaine
9.00
Decyl Glucoside
2.00
B
Water
25.00
Sodium Chloride
2.50
Glycerin
2.00
C
Water
up to 100.00
D
Methylisothiazolinone (&) Phenoxyethanol
0.45
E
Citric Acid 30% pH= 5.5-6
a.n.

Preparation:

Mix the ingredients of phase A with the spatula. Phase B: solubilise Sodium Chloride in water, add the other ingredients and homogenise. Pour phase B to Phase A and homogenise. Pour to this system Phase C and homogenise very quickly. Add phase D. Adjust the pH to 5.5-6 with citric acid solution (phase E).

Notes:

Properties Viscosity: (mPa·s) (after 24 h) Brk,RVDV-E, Sp 2, 20 rpm 200-500 pH (100%): 5.5-6.0
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.