COLD PROCESS SOAP USING EXOTIC BUTTERS & OILS (FOR NORMAL SKIN)

Hallstar
Phase
Product
INCI Name
Supplier
Volume
A
Aloe Butter
30.0
Soy Butter – Ultra Refined™
19.7
Distilled Water
24.5
Lye
9.3
Orange Butter™
5.8
Avocado Oil – Ultra Refined™
3.8
Shea Butter – Ultra Refined™
3.0
Beeswax
2.0
Chamomile Butter
1.2
Essential oil (Tangerine)
0.7

Preparation:

Prepair moulds and any other ingredients in advance. Dissolve lye in the distilled water, adding the lye slowly to the water. (The lye will react immediately with the water and get very hot!) Allow mixture to cool to 55°C. Heat oils to 55°C. Melt the exotic butters with the oils separately from water/lye mixture until clarified (approximately 55°C max). Once the lye solution and the oil/butter mixture reach 55°C seperately, carefully add the lye solution to the oil/butter mixture; stir until trace (thick slurry). This stirring process can take up to 1 hour using a mixer. At trace, add the essential oil. Stir to mix thoroughly and pour into moulds. Insulate with covers and leave to rest undisturbed for 24 hours. Unmould and cut into desired shapes. Cure for at least 3 to 5 weeks.
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Latest Issues

IFSCC 2024

Recanto das Cataratas Thermas Resort, Iguazu Falls, Brazil
14th - 17th October 2024

SEPAWA

Estrel Congress Center, Berlin
16th - 18th October 2024