Dermal Filler Cream MAC 672/3/1
Evonik Nutrition & Care GmbH
Preparation:
1.Heat phase A and B separately to approx. 80 °C. 2.Add phase A to phase B with stirring1). 3.Homogenise. 4.Cool with gentle stirring to approx. 60 °C and add phase C. 5.Homogenise for a short time. 6.Cool with gentle stirring and add phase D below 40 °C. 1) Important: If phase A has to be charged into the vessel first, phase B must be added without stirring.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At The FOREFRONT
Everything started at the forefront of sea explorations, between the Varde and Grouin headlands, on the edge of Brittany, a vantage point that affords broad views and a look out to sea. The sea is at the same time our source of inspiration and our primary source of creation.
At the forefront of innovation, we never stop...
Connex-C Asia 2025
Lee Kong Chian School of Medicine - Ong Tiong Tat and Irene Tan Liang Kheng Auditorium 11 Mandalay Road, Level 4, Singapore 308232
31 July - 1 August 2025
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
