All Purpose Cream

Phase
Product
INCI Name
Supplier
Volume
A
GLUCATE™ DO
Methyl glucose dioleate
2.00
Dimethicone (100cs)
0.50
PROMULGEN™ D
Cetearyl alcohol and ceteareth-20
0.50
PROMYR ™
Isopropyl myristate
2.00
Cetyl alcohol
0.50
Caprylic/capric triglyceride
2.50
B
Lubrajel DV
ISP
15.00
GLUCAM™ E-20 Distearate distearate
PEG-20 methyl glucose
4.0
GLUCAM™ E-20
Methyl gluceth-20
2.0
PPG-12-buteth-16
Dow Chemical
1.0
Deionized water
70.0
Preservative
q.s.

Preparation:

1 Disperse Lubrajel DV in room temperature water with propeller agitation. When it is fully dispersed, add remaining water phase ingredients while heating and mixing to 75°C. 2 In a separate container, add the oil phase ingredients and heat to 75°C. 3 Add the water phase at 75°C to the oil phase at 75°C, mix for ten minutes, then begin cooling while mixing to room temperature.

Notes:

This mineral oil-free cream provides conditioning especially for dry skin areas. It has a non-oily, emollient feel. The combination of GLUCATE™ DO and PROMULGEN™ D emulsifiers and GLUCAM™ E-20 Distearate moisturizing agent gives good emulsification to this system. Lubrajel DV is used primarily for viscosity, but it is also used in combination with GLUCAM™ E-20 to provide humectancy.
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.