ACNE TREATMENT LOTION No. 1739

An everyday lotion to be applied to the face, to help treat acne while moisturizing and not clogging pores.
Phase
Product
INCI Name
Supplier
Volume
A
Deionized Water
75.45
Disodium EDTA (119)
0.10
Veegum Ultra (31)
Magnesium Aluminum Silicate
0.70
B
Keltrol CG-T (22)
Xanthan Gum
0.35
Liponic® EG-1 (1)
Glycereth-26
2.50
C
Lipocol® S-21 (1)
Steareth-21
1.50
Lipocol® S-2 (1)
Steareth-2
3.50
Lipocol® SC (1)
Cetearyl Alcohol
1.50
Lipo Stearic Acid (1)
Stearic Acid
2.00
Lipocol® P-15 (1)
PPG-15 Stearyl Ether
7.00
Silkflo® 364 (88)
Hydrogenated Polydecene
3.00
Salicylic Acid USP (119)
Salicylic Acid USP
1.00
200 Fluid, 50cs (72)
Dimethicone
1.00
D
Preservative
qs
Trolamine (119)
Triethanolamine
0.40

Preparation:

1. In main kettle mix Sequence 1 to form a vortex, add Veegum Ultra, mix for 15 minutes. 2. Premix Xanthan Gum with Liponic EG-1 (Sequence 2). Add slurry to main vessel. Continue mixing at room temperature for 15 minutes. 3. Heat to 70-75°C with medium speed. 4. In a separate vessel combine Sequence 3, heat to 70-75°C. 5. Slowly add Sequence 3 to kettle, continue mixing until a uniform emulsion is formed, scraping sides often. 6. Homogenize batch at 65 - 70°C, return to propeller mixing, and continue cooling. 7. Add Sequence 4 at 45°C, adjust the pH 3.8 - 4.2 continue mixing. 8. When batch cools to 40°C, stop mixing. Batch sets up overnight and will thicken.

Notes:

pH: 4.1 +/- .2 Viscosity: RVT/TD @ 3 rpm = 27,000 cps ? 10% Stability: 1 Month at 50°C (1) Lipo Chemicals, Inc. (31) R.T. Vanderbilt Co. (22) CP Kelco (72) Dow Corning Corp. (88) Lipo (Ineos) (119) Ruger Chemical Co.
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.